Z9 Magazine Combo 3 for Glock 43

Manufacturer: Shield Arms
Three Z9 9-round steel magazines and two Z9 +1 extensions for the Glock 43: run two at 10 and one at 9. Requires a Shield Arms Z-Series steel mag catch (sold separately).
SKU: Z9-COMBO-3M-2E
Availability: In stock
Old price: $165.95
$139.95
i h
Buy now, pay later Available at checkout on orders over $150
Know Before You Order

Mags and Two +1s. The Steel Catch Is Sold Separately.

This combo is three Z9 magazines and two Z9 +1 extensions for the single-stack Glock® 43. It doesn't include a mag catch. The Z9 is steel and runs on a Shield Arms Z-Series steel catch, not the polymer catch the pistol ships with, so every pistol that runs these needs our Standard or Premium catch. Starting from scratch? Combo 1 includes the catch.

What Is the Z9 Magazine Combo 3?

Z9 Magazine Combo 3 is three Shield Arms Z9 9-round steel magazines and two Z9 +1 extensions for the Glock® 43. Run two Z9s at 10 and keep the third at 9, 29 rounds in all. The magazines have a Powercron finish, each +1 is billet aluminum with its own plus-power spring, and the magazines run on a Shield Arms Z-Series steel mag catch, sold separately. Made in the USA, with the extensions machined in Bigfork, Montana, and a lifetime warranty and Spring for Life.

  • In the combo: (3) Z9 magazines, (2) Z9 +1 extensions
  • Fits: Glock® 43
  • Capacity: 9 per Z9, 10 with a +1; 29 total
  • Requires: a Z-Series steel mag catch, sold separately
Carry + Spares

Three Z9s. Two of Them at Ten.

The Z9 puts nine rounds in a Glock® 43 at the length of a factory mag with a pinky extension. Combo 3 adds two +1 extensions to the box, so two of the three run at 10.

Carry a Z9 at 10 in the pistol and a second 10 as your reload, with the 9 as a spare or range mag. Want them back at 9 for a while? The extensions come off. Already running the steel catch? This adds three mags, two of them at 10, in one box.

3 Z9 magazines
2 +1 extensions, two mags at 10
29 Rounds, 10 + 10 + 9
USA Made, with Spring for Life
In the Combo

Three Mags, Two Extensions

  • Three Z9 Magazines

    Nine rounds each in a heat-treated steel body with a Powercron finish and an easy-remove base pad.

  • Two Z9 +1 Extensions

    Billet 6061 aluminum, machined in Bigfork, Montana. Each comes with its 12-coil plus-power spring and takes a Z9 to 10.

  • Easy-Access Floor Plate

    Open each extension for cleaning without pulling it off the magazine. Index cuts help you strip it from a pouch.

  • Set It Up Your Way

    A +1 fits any Z9. Run 10 / 10 / 9, go all 9s, or move them to whichever mags you want extended.

One Magazine, Three Sizes

Carry 9. Two of Them at 10.

Carry the Z9 as it comes, or swap the base pad for an extension: 10 with the +1, 12 with the +3. This combo includes two +1s.

Want the third mag at 10 too? Add a Z9 +1 Extension. Capacity laws vary by state and city. Check yours before you buy.

Required, Sold Separately

Every Pistol Needs a Steel Catch

The Z9 is steel and the factory Glock® 43 catch is polymer. We build the Z-Series to run steel on steel, so each pistol that runs these magazines needs our Standard or Premium Z-Series catch, both made in the USA. The Premium sticks out slightly further and engages the magazine slightly more. It's a one-time install per pistol, and our installation guides cover the catch and the extensions. Another manufacturer's catch may cause reliability issues.

Compare

Pick Your Setup

Need the catch too? Combo 1, the Dual Mag Kit and the Starter Kit include it.

Kit Magazines Extensions Steel Catch
Z9 Magazine Combo 3 (this page) 3 × Z9 2 × +1 —
Z9 Magazine Combo 2 3 × Z9 1 × +1 —
Z9 Magazine Combo 1 3 × Z9 — ✓
Z-Series Dual Mag Kit Z8 + Z9 — ✓
Z9 Starter Kit 1 × Z9 — ✓

Want the +1 already on? The Z9 +1 Pre-Installed ships ready to load. See all Z-Series combos.

Specifications

In the combo (3) Z9 magazines, (2) Z9 +1 extensions, each with spring
Compatible pistol Glock® 43
Capacity 9 rounds of 9mm per Z9, 10 with a +1; 29 total as 10 / 10 / 9
Length Z9: same as a factory Glock® 43 magazine with a pinky extension; each +1 adds a little below that
Magazine body Heat-treated steel
Magazine finish Powercron (cationic epoxy electrocoat)
Extensions (2) Z9 +1, billet 6061 aluminum, Type II black anodized, 12-coil plus-power spring, easy-access floor plate, index cuts
Base pad Easy-remove, impact resistant; swaps for Z9 +1 or +3 extensions
Mag catch Shield Arms Z-Series steel catch required (Standard or Premium), sold separately
Made in USA; extensions machined in Bigfork, Montana
Warranty Lifetime warranty plus Spring for Life on the magazines and extensions

Powercron Mags, Black Extensions

The three magazines have a Powercron finish, a cationic epoxy electrocoat, lead-free and low-VOC, that holds up to sweat, humidity and salt air. We use more than one Powercron applicator to keep magazines in stock, so the sheen can vary slightly from batch to batch. Both +1 extensions are black anodize.

Powercron Black Anodize
Questions

Z9 Combo 3 FAQ

Does it include a mag catch?

No. Combo 3 is magazines and extensions only. Each pistol needs a Shield Arms Standard or Premium Z-Series steel catch. Setting up more than one Glock® 43? Order one catch per pistol.

Which pistols does it fit?

The single-stack Glock® 43. For the Glock® 43X and 48, see the S-Series. For the Glock® 19 and 17, see the DS-Series.

How do I install the extensions?

Remove the Z9 base pad, swap in the 12-coil plus-power spring that comes with each +1, and install the extension. Follow the included instructions and our installation guides.

Can I carry the Z9 at 10?

Yes. The +1 adds the least length of any Z9 extension, which makes a 10-round Z9 a natural carry mag. With two 10s in this combo, you can carry one and keep the other as your reload.

Can I extend all three mags?

The combo has two +1s, and each fits any Z9. To run the third at 10, add a Z9 +1 Extension. For 12, add a Z9 +3.

Standard or Premium catch?

Both are steel and both run every Z-Series magazine. The Premium sticks out slightly further than the Standard, so it's easier to reach and press, and it engages the magazine slightly more.

Will my factory 6-round mags still work?

They'll run with the steel catch, but we don't recommend it for regular use. Steel on polymer adds wear to the magazine over time.

How do I clean the magazines?

Push the tab on the bottom of the Z9 and slide the base pad off, holding the spring with your thumb. No punch needed. On the extended mags, open the floor plate instead.

What is Spring for Life?

Free replacement springs for as long as you own your Z9s and extensions. See the program.

What's covered?

A lifetime warranty against defects in materials and workmanship, plus Spring for Life on the magazines and extensions.

ODA Green

Used on: magazine extensions, magwells

ODA's (Operational Detachment Alpha) are the boots on the ground operational teams of a Special Forces Group. This color began as a special run for a deployed ODA. In continued support we have decided to continue the color as a standard offering and donate a portion of the proceeds to The Green Beret Foundation. Finish is anodized in green.

QPQ Nitrocarburizing Surface Treatment

Used on: magazines, barrels, slides

QPQ Nitrocarburizing is a type of surface treatment used to enhance the durability and corrosion resistance of metal parts. The process involves heating the metal in a controlled environment, where nitrogen and carbon are introduced to the surface of the metal. This forms a thin layer of a hard compound called "nitrides," which increase the surface hardness of the metal.

During the QPQ Nitrocarburizing process, the metal is immersed in a special salt bath and heated to high temperatures. The salt bath contains a mixture of chemicals that release nitrogen and carbon, which penetrate the surface of the metal. The process is carefully controlled to ensure that the nitrogen and carbon penetrate to a specific depth, creating a uniform layer of nitrides on the metal's surface.

The resulting nitride layer provides many benefits to the metal parts, including increased hardness, wear resistance, and corrosion resistance. This treatment helps to increase the lifespan and durability of metal parts, making them more reliable and long-lasting.

Any “scuffing” you see in the surface finish is completely normal, and will not affect the durability or corrosion resistance of the steel.

Electroless Nickel Plating

Used on: magazines

Silver electroless plating offers superior electrical conductivity and corrosion protection with excellent deposit uniformity and adhesion properties. This bright, reflective finish provides outstanding solderability and contact resistance while maintaining the consistent thickness and coverage that electroless plating processes are known for. Black electroless nickel plating provides these same exceptional deposit properties - including lubricity, hardness, and corrosion resistance - but with a fully conductive and uniform black surface finish that combines superior performance with an attractive dark appearance.

Products specifications
Firearms Manufacturer Glock
Firearms Model Glock 43
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
Z9 Premium Steel Mag Catch for Glock® 43 - Nitride

Premium Z-Series Mag Catch for Glock 43

Premium-grade steel magazine catch engineered exclusively for Glock 43 pistols with Shield Arms Z8 and Z9 magazines. Features extended engagement surface and enhanced knurling for superior control and reliability.
$28.95
Z9 +1 Mag Extension for Glock® 43 - Black

Z9 +1 Magazine Extension for Glock 43

Takes a Shield Arms Z9 magazine from 9 rounds to 10 in your Glock® 43. Billet 6061 aluminum, easy-access floor plate, 12-coil plus-power spring included. Made in the USA.
$39.95
Z9 +3 Mag Extension for Glock® 43 - Black

Z9 +3 Magazine Extension for Glock 43

Takes a Shield Arms Z9 magazine from 9 rounds to 12 in your Glock® 43, double the factory mag. Billet 6061 aluminum, black anodized, 14-coil plus-power spring included. Made in the USA.
$37.95
Premium S15 Steel Mag Catch for Glock® 43X / 48 - Nitride

Premium S15 Steel Mag Catch for Glock 43X/48

Premium hand-specific steel mag catch for Shield Arms S15 magazines. Enhanced ergonomics with extended knurling, beveled edges for smooth reloads, and increased magazine engagement. Not compatible with OEM magazines. Select left or right hand. Made in USA, lifetime warranty.
$36.95
S15 Combo Pack 5 - Nitrocarb

S15 Combo Pack 5 for Glock 43X / 48 – 5 Magazines

Five S15 Gen 3 15-round steel magazines for the Glock® 43X and 48, in black Nitrocarb. 75 rounds, all flush. Requires a Shield Arms steel mag catch, sold separately.
$189.95

FREE SHIPPING FOR ORDERS OVER $100!