SA-9 Gen2 Stripped Folding Lower Receiver - 9mm

Manufacturer: Shield Arms
Our patented folding lower for 9mm blowback builds, sold stripped. Runs Glock double-stack 9mm magazines, locks back on empty, and includes the 7.0 oz buffer. Ships to your FFL.
SKU: SA-9-SLU
Availability: In stock
$399.95
i h
Buy now, pay later Available at checkout on orders over $150
Know Before You Order

A Stripped 9mm Folding Lower. Ships to Your FFL.

This is the SA-9 Gen 2 folding receiver with our 7.0 oz buffer, the threaded bolt catch pin and buffer retaining pin, and the magazine release installed. You add a 9mm blowback AR upper, lower parts kit, buffer tube and spring, grip, stock or brace, and hex wrenches for the threaded pins. The lower is the serialized part of the firearm, so it ships to the licensed dealer (FFL) you choose. How FFL transfers work.

It runs Glock® double-stack 9mm magazines. Build it as a rifle on a barrel of 16" or longer, as a pistol with a brace, or as a registered SBR. AR pistol, brace and magazine-capacity rules vary by state and city. Check yours before you buy.

What Is the SA-9 Gen 2 Stripped Folding Lower Receiver?

The SA-9 Gen 2 is a 9mm AR lower receiver with the folding mechanism machined into the receiver, so the build folds without a hinge adapter. It's our patented Folding Lower Receiver (FLR) for closed-bolt blowback 9mm builds. It runs Glock® double-stack 9mm magazines, locks the bolt back on an empty magazine, and weighs 11.2 oz stripped. Machined from 7075-T6 billet aluminum in Bigfork, Montana, and hard-coat anodized black (MIL-A-8625 Type III Class 2). It ships to your FFL and has a lifetime warranty.

  • Caliber: 9mm, closed-bolt blowback
  • Magazines: Glock® double-stack 9mm
  • Included: 7.0 oz buffer, threaded pins, magazine release
  • Weight: 11.2 oz, stripped
SA-9 Gen 2 Stripped Lower

Build a Folding 9mm That Runs Your Glock® Mags.

Most folding ARs bolt a hinge on behind the receiver. The SA-9 folds at the receiver itself, on our patented FLR, so there's no adapter between the lower and the buffer tube. Our own SA-9 pistol closes from 23.5" to 13" this way.

It feeds from the same Glock® double-stack 9mm magazines your pistol uses, so one set of mags covers both. Start stripped and pick the upper, trigger, grip and brace or stock you want. Gen 2 adds a last round bolt hold open and a redesigned magazine release for more positive magazine engagement.

11.2 oz Stripped weight
0 Folding adapters
LRBHO Locks back on empty
USA Bigfork, Montana
Features

Built Around the Fold and the Glock® Mag

  • Patented Folding Lower

    The fold is machined into the 7075-T6 billet lower. No hinge adapter between the receiver and the buffer tube.

  • Glock® Magazines

    Runs Glock® double-stack 9mm magazines, from the 10-round Glock® 26 to 33-round sticks. The magazine release comes installed.

  • Last Round Bolt Hold Open

    Locks the bolt back when the magazine runs dry, so you know it's time to reload.

  • Threaded Pins

    The bolt catch and buffer retainer use threaded pins instead of roll pins, so they install and come out with a hex wrench, not a punch. Both pins come with the lower.

Magazines

Bring the Mags You Already Own

The SA-9 runs factory Glock® 17, 19 and 26 magazines. Add one of our +5 extensions to a Glock® 17 or 19 mag for 22 or 20 rounds.

33-round Glock® magazines also fit. Capacity laws vary by state and city. Check yours before you buy.

Finishing the Build

Standard Parts, Our Buffer

Install a standard AR-15 lower parts kit, a buffer tube with castle nut, end plate and spring, the included 7.0 oz buffer, and the grip and brace or stock you want. Then pin on a 9mm blowback AR upper and function check before you shoot. Blue Loctite 242 is included for the threaded parts. Don't swap in a standard AR-15 buffer; the fold needs ours. Our installation guides walk you through it.

Compare

Pick Your Starting Point

Every SA-9 folds on the same patented lower. Start stripped, or buy the complete pistol.

Option Caliber Parts Kit Upper
SA-9 Stripped Lower (this page) 9mm — —
SA-9 7.5" Pistol 9mm ✓ ✓
SA-9 ASR Kit 9mm ✓ ✓
SA-15 Stripped Lower 5.56 / 300 BLK — —

Building in 5.56 or 300 BLK instead? Start with the SA-15 stripped folding lower. See all folding lowers.

Specifications

Receiver Shield Arms patented Folding Lower Receiver, SA-9 Gen 2, 7075-T6 billet aluminum
Caliber 9mm (9x19), closed-bolt blowback
Finish Matte black hard-coat anodized, Type III Class 2 (MIL-A-8625)
Weight 11.2 oz, stripped
Magazines Glock® double-stack 9mm, including the 17, 19, 26 and 33-round
Magazine release Shield Arms Gen 2 magazine release, installed
Bolt hold open Integrated last round bolt hold open
Buffer Shield Arms 7.0 oz stainless steel buffer with removable steel weights, included; required for the folding lower
Pins Threaded bolt catch pin and threaded buffer retaining pin, included; install with a hex wrench (not included)
Selector Standard AR-15 safety selectors, including 45° and 60° short-throw
Also included Blue Loctite 242 for the threaded parts
You add 9mm blowback AR upper, lower parts kit, buffer tube with castle nut, end plate and spring, grip, stock or brace; hex wrenches for the threaded pins
Made in Bigfork, Montana, USA
Warranty Lifetime warranty
Transfer Ships to your FFL

Hard-Coat Anodized Black

The SA-9 stripped lower comes in one finish: matte black hard-coat anodized, Type III Class 2 to MIL-A-8625, for wear and corrosion resistance.

Anodized Black
Questions

SA-9 Stripped Lower FAQ

Which magazines does it take?

Glock® double-stack 9mm magazines, including the 17, 19, 26 and 33-round. Our Glock® 19 +5 and Glock® 17 +5 magazines run in it too.

What do I need to finish it?

A 9mm blowback AR upper, a standard AR-15 lower parts kit, a buffer tube with castle nut, end plate and spring, a grip, and a stock or brace. The buffer, threaded pins and magazine release come with the lower; hex wrenches don't.

Can I use a different buffer?

No. The SA-9 runs our 7.0 oz buffer, which is included. It's part of the folding system, so a standard AR-15 buffer isn't a substitute. Its removable steel weights let you tune it to your load or a suppressor.

What changed in Gen 2?

Gen 2 adds an integrated last round bolt hold open, a redesigned magazine release for more positive engagement, threaded pins and updated styling.

How is the fold different from a folding adapter?

An adapter adds a hinge behind the receiver. On the SA-9 the fold is machined into the lower receiver itself, on our patented FLR. See how the FLR works.

Can it fire while folded?

No. Unfold it and lock the receiver before firing. The fold is for carry and storage.

Rifle, pistol or SBR?

With a stock, use a barrel of 16" or longer; a shorter barrel with a stock is a short-barreled rifle under federal law and needs NFA registration. With a brace and a shorter barrel, it's an AR pistol. Check your state and local rules too.

Will my lower parts kit and trigger fit?

Yes. It takes standard AR-15 lower parts kits and triggers, and standard safety selectors, including 45° and 60° short-throw.

Does it ship to my door?

No. The lower receiver is the serialized part of a firearm, so it ships to the licensed dealer (FFL) you choose. See how FFL transfers work.

What's covered?

Our lifetime warranty covers defects in materials and workmanship, including the folding receiver.

Firearm Transfers

Email your preferred FFL to [email protected]. Include:

  • Your name
  • Order number
  • FFL name and address
  • Copy of the FFL (if available)
Products specifications
Firearms Manufacturer Shield Arms
Firearms Model SA-9
Installation Help

Not sure how to install this product? Our step-by-step guides and video walkthroughs make it simple.

View Installation Guides →
Customers who bought this item also bought
SA-15 Stripped Folding Lower Receiver - Black

SA-15 Stripped Folding Lower Receiver

Our patented AR-15 folding lower, sold stripped: the fold is machined into the 7075-T6 billet receiver, so there’s no folding adapter. Buffer included; ships to your FFL.
$374.95

FREE SHIPPING FOR ORDERS OVER $100!