ULTICLIP

Why Ulticlip? There’s no other holster clip retention product that compares to our level of retention and concealment. Replace your holster clip with ULTICLIP’s patented design to gain over 10 times the holster retention while increasing concealability. Greater retention means your holster is more versatile and can be used in ways previously unimaginable.
Availability: In stock
*
$12.99
- +

MANUFACTURERS DESCRIPTIONS 

UltiClip Classic 

Ulticlip has a dual mounting bracket. Ulticlip works with single point attachment holsters and can also be used with holsters that use a retention slot to lock the clip in place without using a screw.

  • 100% American Made
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • C-1075 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Minimum Profile, Maximum Concealment
  • Over 10X The Retention Compared To Most Holster Clips
  • Dual Mounting Bracket
  • Size: 3.5″ x 7/8″
  • Weight: .78 oz.

UlitClip Slim 2.2 

The Ulticlip Slim 2.2 is slightly over 1/2″ wide and only 2.2″ long making it’s ideal for smaller applications while still providing great retention.  The single slotted mounting area allows for two screws to prevent the clip from rotating.

  • Built for belt-less carry
  • 100% American Made
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • C-1075 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Minimum Profile, Maximum Concealment
  • Single Slotted Mounting Bracket
  • Size: 2.2″ x .60″
  • Weight: .78 oz.

UltiClip Slim 3.3 

The Ulticlip Slim 3.3 provides great retention and concealment.  It has a dual slotted mounting area that  allows for 1.5″ hole spacing.  The Slim 3.3 is slightly over 1/2″ wide making it ideal for knife sheaths or other narrow applications.

  • Built for belt-less carry
  • 100% American Made
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • C-1075 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Minimum Profile, Maximum Concealment
  • Dual Slotted Mounting Bracket
  • Size: 3.3″ x .60″
  • Weight: .60 oz.

UltiClip3+

Ulticlip3+ provides the same great retention and concealment as found in the original Ulticlip.  Ulticlip3+ has a flat mounting area with 2 slots & 1 hole allowing for multiple mounting options. The mounting hole and slots allow up to 1.70″ hole spacing.

  • 100% American Made
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • C-1075 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Minimum Profile, Maximum Concealment
  • Over 10X The Retention Compared To Most Holster Clips
  • Multiple mounting holes with up to 1.70″ hole spacing
  • Size: 3.5″ x 7/8″
  • Weight: .78 oz.

UltiClip XL 

The XL’s locking belt loop allows the user to carry a holster, knife sheath or accessory IWB (Inside the Waist Band), OWB (Outside the Waist Band), or without a belt.  The multi-tool wrench sizes are 1/4″, 5/16″ & 3/8″ allowing it to be used on #6, #8, #10, #12, #14 and 1/4″ screws.  It also includes a flat blade screwdriver.

Ulticlip XL has multiple attachment points allowing it to be used on many different holsters, knife sheaths and other products.

  • Removable multi-tool
  • Locking Steel Belt Loop
  • Works with 1.5″ wide belts that are up to 3/8″ thick
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • 1075 & 1050 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Multiple Mounting Bracket Holes
  • Size: 3.5″ x 7/8″
  • Weight: 1.37 oz.

UltiTuck 

The UltiTuck combines 3 great features into 1 clip. It replaces most two hole horizontally mounted clips while providing these additional features:

  • Tuckable design – The innovative design transforms a traditional holster into a tuckable holster.
  • Beltless carry – The UltiTuck is built around the patented Ulticlip locking system which allows for beltless carry
  • Adjustable cant –  Two “T” shaped slots allow for adjustable cant and variable mounting hole widths of .60″ to 1″
  • Tuckable design
  • Best option for belt-less carry
  • 100% American Made Clip
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • C-1075 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Minimum Profile, Maximum Concealment
  • Over 10X The Retention Compared To Most Holster Clips
  • Size:1.5″ wide x 2.17″ long   *See mounting template for more measurements
  • Weight: .78 oz.

UltiLink Complete Kit 

The UltiLink is a modular linking system that allows for swift attachment, removal, and reattachment of molle gear, sheaths, mag carriers, and other items.

 

MANUFACTURERS DESCRIPTIONS 

UltiClip Classic 

Ulticlip has a dual mounting bracket. Ulticlip works with single point attachment holsters and can also be used with holsters that use a retention slot to lock the clip in place without using a screw.

  • 100% American Made
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • C-1075 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Minimum Profile, Maximum Concealment
  • Over 10X The Retention Compared To Most Holster Clips
  • Dual Mounting Bracket
  • Size: 3.5″ x 7/8″
  • Weight: .78 oz.

UlitClip Slim 2.2 

The Ulticlip Slim 2.2 is slightly over 1/2″ wide and only 2.2″ long making it’s ideal for smaller applications while still providing great retention.  The single slotted mounting area allows for two screws to prevent the clip from rotating.

  • Built for belt-less carry
  • 100% American Made
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • C-1075 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Minimum Profile, Maximum Concealment
  • Single Slotted Mounting Bracket
  • Size: 2.2″ x .60″
  • Weight: .78 oz.

UltiClip Slim 3.3 

The Ulticlip Slim 3.3 provides great retention and concealment.  It has a dual slotted mounting area that  allows for 1.5″ hole spacing.  The Slim 3.3 is slightly over 1/2″ wide making it ideal for knife sheaths or other narrow applications.

  • Built for belt-less carry
  • 100% American Made
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • C-1075 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Minimum Profile, Maximum Concealment
  • Dual Slotted Mounting Bracket
  • Size: 3.3″ x .60″
  • Weight: .60 oz.

UltiClip3+

Ulticlip3+ provides the same great retention and concealment as found in the original Ulticlip.  Ulticlip3+ has a flat mounting area with 2 slots & 1 hole allowing for multiple mounting options. The mounting hole and slots allow up to 1.70″ hole spacing.

  • 100% American Made
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • C-1075 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Minimum Profile, Maximum Concealment
  • Over 10X The Retention Compared To Most Holster Clips
  • Multiple mounting holes with up to 1.70″ hole spacing
  • Size: 3.5″ x 7/8″
  • Weight: .78 oz.

UltiClip XL 

The XL’s locking belt loop allows the user to carry a holster, knife sheath or accessory IWB (Inside the Waist Band), OWB (Outside the Waist Band), or without a belt.  The multi-tool wrench sizes are 1/4″, 5/16″ & 3/8″ allowing it to be used on #6, #8, #10, #12, #14 and 1/4″ screws.  It also includes a flat blade screwdriver.

Ulticlip XL has multiple attachment points allowing it to be used on many different holsters, knife sheaths and other products.

  • Removable multi-tool
  • Locking Steel Belt Loop
  • Works with 1.5″ wide belts that are up to 3/8″ thick
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • 1075 & 1050 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Multiple Mounting Bracket Holes
  • Size: 3.5″ x 7/8″
  • Weight: 1.37 oz.

UltiTuck 

The UltiTuck combines 3 great features into 1 clip. It replaces most two hole horizontally mounted clips while providing these additional features:

  • Tuckable design – The innovative design transforms a traditional holster into a tuckable holster.
  • Beltless carry – The UltiTuck is built around the patented Ulticlip locking system which allows for beltless carry
  • Adjustable cant –  Two “T” shaped slots allow for adjustable cant and variable mounting hole widths of .60″ to 1″
  • Tuckable design
  • Best option for belt-less carry
  • 100% American Made Clip
  • Military Grade Black Oxide Finish
  • Heat Treated to RC 42-49
  • C-1075 Spring Steel
  • Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
  • Minimum Profile, Maximum Concealment
  • Over 10X The Retention Compared To Most Holster Clips
  • Size:1.5″ wide x 2.17″ long   *See mounting template for more measurements
  • Weight: .78 oz.

UltiLink Complete Kit 

The UltiLink is a modular linking system that allows for swift attachment, removal, and reattachment of molle gear, sheaths, mag carriers, and other items.

 

Write your own review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Customers who bought this item also bought
Shield Arms S15 Starter Kit

S15 Starter Kit

1 Gen 2 S15 Magazine with Powercron and 1 Standard Steel Mag Catch - the bare essentials to switch to an optimized 15 rounds in the Glock 43X/48.
$60.00
Z9 Glock© 43 Combo 1

Z9 Magazine Combo 1

Sign up for the newsletter to be notified when back in stock. Buy a combo pack and save, this combo includes (1) Z9 magazines and (1) black nitride steel mag catch / release.
$60.00
Picture of Glock 43X/48 Carry Magwell

Glock 43X/48 Carry Magwell

Aluminum magwell for the Glock 43X/48 for smoother, faster reloads.
$75.00
Glock 43X / Glock 48 Mag Catch/Release - All Colors

Standard S15 Mag Catch for Glock® 43X / 48

Ambidextrous steel mag catch/mag release for the Glock® 43X and Glock® 48.
$28.99